camber: It is curve upwards to leases and beam which gives a form bent in all bridges to make easier the flow of waters towards the outside and toreduce the detachment of cannons.
All leases of the bridge have the same camber, master leases is the referent.
She camber has a length of: 1495cm
It camber is: 43.34cm
It is small leases which established from the right to the left co Mrs leases of different bridge.
They support laths.
Their length is relating to the distance of leases. In end they have a section identical to the leases of the
The part of the gutter which leans on the limbs must have in the upper thicknessin vaigrage(eding inside). All gutters, in general, are manufactured externally in form one cancup-shaped in comparison with wheelsof the affuts of cannons and does not exceed the planking of bridges.
Every capstan has, next to him on the bridge a wedge or sole which serves twoof fulcrum in linguets or flying buttresses, which prevent the capstan from returning on it self. Edges or assembly recuperates the wicks ofcapstans.
Their bars have to enter the capstan up to the wick.
the big capstan
The big capstan carries 8 bars to every bell.
These are two high wooden rooms standing in a ship, crossed by a third room of cross piece named Bolster ofbollard, and around which cables arepassed to stop them.
Sums of bollards go down up to the bottom of the ship.
They are emboité of one has two thumbs on the crossbeam of the first bridge which grow and on that of the wrong bridge which cross,
the feet of every bollard is kept and strengthens by two courbatons(bend) whounite in make the ship and at the foot of the bollard on whom they are nailed.
it is a wooden room put down in the middle of sums of bollards for liersmutually and to act as support to the cable.
He is put behind and if emboite on the bollards of one has two deep thumbs.
He is fixed to his post by hooks which tiehim to bollards and supported al thoughby a wedge or rather broad console onenail under him on every bollard.
Wedges of bollard: Curves located aheadof the big bollards put between the leases of the first bridge and sums of bollards.
One of both branch of the curve unites with the bollard up to the upper elevation of the edge of the bolster.
The second branch it extends up to the gutter and successful also next to thestem,
this branch ci is endentée in sprawling sound between every leases of the first bridge which crosses,
most ankles which fixes this branch on every crossbeam have the heads trimmed witha curl or ring.
These curls are of use for the establishment of bumps necessary forthe maneuver of cables.
Pomp of the matt of spanker and of the pumpwells.
These are pumps with gallows,
The edging is put down in clin:
The 1er 600cm
The 2ème 750cm
The 3ème 300cm
The 4ème 150cm
And they go back to the first
The edging of the bridge with thickness: 13.55cm
The edging between the coaming of middle: in thickness: 18 97cm
Breadth and circumference are made proportional in the thickness of the furof gutter, and they are trimmed with alead double.
They have to be below the ladder except edge nor above a scuttle.
Dalots is pierced in gutters. And there is 4 in faces of the main pomps, 1 towards the spanker, and 1 in front of the drip tray on each side.
It is a kind of reservoir that is made a head of the ship in all its breadth andin can of distance of ecubiers(hauses-holes).
The height of this wall comes to the height lower of ecubiers(hauses-holes).
Two dalot are faces in the stem
Ecubiers(hauses-holes) are round, opening holes askew on each side of the stem, underneath the poulaine( head), in which pass the cables of anchors
They are faces in bites, they are doubled of lead and dubbing is called a cushion
Their walls are removable
the room of the writer and that of the master gunner are on the 1 bridge(annexed to the hourdy along the wall)
they have a door which the square of the top is put wire netting
On the 1 bridge there is a shell says: Fronteau of holy bores stiff, who isentirely doubled and who crosses the bridge from the right to the left. She is just put in front of the hatch of the holdin powder.
He there a door on a side.
miniature direct access has the board to wish